SEGA Batman Forever Problems

[silverball]

All your issues seem to be coming from the front of the cab, check switches /wiring at the coin door. Check the slam tilt switch on the coin door.

[daics3522]

I have done that already and nothing is out of the ordinary. No adjustments or changes were made to anything near the coin door.

[silverball]

No adjustments near the coin door had to be made, could be an unrelated problem. Seen the slam switch cause havoc on many occassion.

I would power down, remove playfield connectors at pcb and add one at a time and isolate what is causing the issues.

[wonder]

I have done that already and nothing is out of the ordinary. No adjustments or changes were made to anything near the coin door.

Thats why we have to check everything you touched.

Will be that way Sunday for soccer so can drop pass and bring that sticker,that if the colors are all right.

[Caveoftreasures]

how is batman.

Q- is it fixed yet.
sounds like a switch plug is back to front, meaning that one of the plugs may have polarity on it and you may have reversed it...meaning one side is positive/one side is negative on a two pronged plug/male female style and u have plugged it in back to front without knowing..need a real good torch etc etc...and the manual...anyway, enough of me rambling, is it fixed yet ? 
regards, caveman 

[daics3522]

Batman Forever lives 
Thanks to the efforts of Morrie and Craigo (wonder) last night via tele-conference and Joey (Jomac) today BATMAN IS ALIVE 
My strip and re-assembly of the playfield caused me (qualified pinball technician like my avatar states) to have the ramp entry switch wire touching the ball lock 50Volt coil wire and when the machine was switched on, it blew two little resistors on the CPU (sounds like I know what I am talkin about hey, but I have ABSOLUTELY NO IDEA  )