IJ Mode Start Hole

[DARBS]

There is probably heaps of posts about this problem but I cant seem to find them

As other Indy owners would know there is a problem with the ball bouncing straight out of the Mode start hole

Is there any way to fix this or is there a Mod that can be purchased from some where to fix this problem.

Cheers

[indazone gav]

3 part fix;
1. Make sure the scoop is still curved correctly
2. Use some sticky backed rubber in the back of the scoop to deaden the ball when it hits it(available at any hardware) normally comes in soft, medium and hard density. I found medium the best but its cheap as so experiment with which suits best(brand dependent I guess)
3. Lower the saucer by about 1>2mm by removing the screws under the playfield and using some small washers as spacers.
Do this and your problem WILL be fixed, I hardly ever get bounce outs now

[rads]

Pinball Heaven did a mod.  I have seen photos somewhere