I am still waiting for some shipments of parts to allow us to assemble the majority of the kits but we have been able to get the ball rolling by getting together six kits - yes, only six at the moment. We have decided NOT to offer EPROMs as we are already stretching our time way too far and there are many others that can supply them programmed (skybeaux for one).
Here is the kit as it will be supplied:
This is the manual supplied on a T-Flash card with adaptor (50 pages with lots of pics to aid assembly and TONS of additional info - drawings - specs sheets for all parts etc):
Here is the small I.C.s "add-on" package which INCLUDES the Homepin 9602 replacement kit:
and here are the packs of RAMs and Micros if needed:
and the Supercap & spacer if desired:
Prices as follows:
Full kit as pictured includes all parts needed except ICs & Supercap (if required).
$129 inc registered post to any Australian destination.Add-on pricing:
Small ICs package $24 ($12 if using a 6802)
6800 micro $10
6802 micro with crystal, spacer and 2 X ceramic caps $12
6821 $7 each (two required)
6810 $7 (not required if using 6802)
5101 $8
Supercap & spacer $9
Here is the SUPER DOOPER deal:
FULL kit of ALL parts - including all ICs everything needed
except EPROMS:
6800 version (as original Bally/Stern board) $185 (inc reg post)
6802 version $170 (inc reg post)Note that some parts are used (fully tested) such as 6800 and some 6810 as it is getting harder to find them new.
All kits are supplied with the remote battery plug & socket and the CR2032 battery & holder BUT if you wish to use a Supercap add $9 to the prices above.
As I said, there are six kits ONLY at this stage and I would prefer they went to people who are going to assemble them pretty well straight away rather than put them away for a rainy day. Also a limit of one kit per person at this stage. I'm not going to get involved in backwards and forwards-ing "are there any left?" etc - if you want one, PM me and the first 6 PMs - IN ORDER OF RECEIPT will get them.
I will then post saying there are none left. If I haven't posted that then assume there is one left and PM me to claim it. Please tell me what parts you would like with your kit (if any).
The prices are for bank deposit. PayPal attracts a 5% surcharge.
This project has taken an extraordinary amount of time and $$$'s so I really do hope it helps prolong the life of some of these machines or prevent them from being parted out.
