Author Topic: Earth Shaker - Earthquake sinking and raising Institute mod  (Read 906 times)

0 Members and 1 Guest are viewing this topic.

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Lake Macquarie, NSW
Well, was sent home immediately as have lost my job, and now need to sell off somethings to cover bills and will hopefully only temporarily leave pinball for a small period until I get back on my feet.

Today's item is the Earthshaker Earthquake Sinking and Raising Institute kit.

Nino did bring a shipment of pins recently to Aus and one was a Earthshaker which looks like a cool pin and only a handful estimated to be in Aus. I did reserve this pin and then purchased this mod but due to unexpected job loss I have un-reserved the pin with Nino so it is available for someone else.

Only the first 200 Earthshakers made out of the 5265 units in the beginning had the sinking institute feature in it before it was costed out.

I bought the mod from the creator Mark Davidson that has been making these in batches on demand for the last 10 years, and this was his last one from the Rev 3 design and he won't be making any more for at least 2 years and only if the demand is there. I saw it on ebay a few weeks ago and he offered it slightly cheaper if I committed promptly outside of ebay, which I did, costing me $275 plus $45 for insurance and freight and after exchange rates was $345 Aus. On ebay it was $300US plus $50US postage so about $375 Aus at a guess.

I need the money and willing to take a small loss for  a total of $300 + postage. It only arrived yesterday so still nicely packaged ready to be sent on (though I did unpack to inspect that everything was there and repacked).

check out the link - Rev 3, all about the kit and fitting - with no playfield mods required - plug and play to look like the original.
http://www.pinballobsession.com



this was the ebay link when the last one was available
http://www.ebay.com.au/itm/271220558730?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649



here is information about the pin here if you don't know much about it
http://www.ipdb.org/search.pl?any=earthshaker&search=Search+Database&searchtype=quick
http://pinside.com/pinball/archive/earthshaker



Here is a video review of the game and the kit at the 4 minute mark - it is very informative and looks like a cool game




this will be listed on ebay in a day or 2 if no takers.


any purchases would be much appreciated to help me out

Jady



So if you are interested chase up Nino (Strangeways) for the game and grab this kit
https://swinks.com.au

for pinball parts (reproduction & mods)
for pinball t-shirts

Offline Pinballer

  • Trade Count: (0)
  • *****
  • Forum Posts:
Very sorry to hear of your work situation, I hope things improve for you and your family soon.

I'd like to buy the kit from you.  Please PM your bank details and I'll deposit the payment.  Postage to 3825.

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Lake Macquarie, NSW
thanks for the support pinballer but at this stage Greg RTBB called dibs just before 2pm but if it falls through I will send you a message

thanks again
https://swinks.com.au

for pinball parts (reproduction & mods)
for pinball t-shirts

Offline Pinballer

  • Trade Count: (0)
  • *****
  • Forum Posts:
Arrgh, Greg ya bastard  <.>

Offline Greg

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Melbourne
    • rtbb.com.au
Arrgh, Greg ya bastard  <.>

thats Mr. Bastard to you
http://www.rtbb.com.au/catalog/
We carry the largest range of NEW Ramps in Australia

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Lake Macquarie, NSW
Sold to Greg (RTBB), thank you so much  ^^^
https://swinks.com.au

for pinball parts (reproduction & mods)
for pinball t-shirts

Offline Pinballer

  • Trade Count: (0)
  • *****
  • Forum Posts:
Arrgh, Greg ya bastard  <.>

thats Mr. Bastard to you

Sorry I forgot who I was talking too!  :D