Hey all,
It is amazing these days how quickly you can repair worn PF spots that seem to occur on some of these pinball machines.....I thought I would post a few before and after shots of worn ( and now fixed ) areas of my Fish Tales and my WH20 so you can see the results you get when using these decals.
Now, to get it right ( I believe ) you cant just slap the sticker on and be happy, you should still do some work 'around' the area with some paints and a fine paintbrush to get it to blend in if need be.....
FISH TALESTheres a section of 4 Fish in the middle of the PF on Fish Tales known as ' the Stringers' .....here is how my machine looked when it arrived ( and I believe most FT's have this issue? ) .....
And here it is after just a little touching up and then overlaying the new decals from Curly at Lil shop of Pinball.....each fish decal cost me $10.00 and EACH came with a matching mylar shape to protect them as well.....and Curly ALWAYS gets goods from USA to Australia in about 1 week as well.
There is still a tiny bit of touching up to be done around some of the fish fins if you look closely, as the decals are only for the bodies/head section......but even if you didnt do that this area looks 100% better than before.
WHITE WATERThis machine is famous for having a few PF wear spots....I managed to jag this decal with the help of a mate as the ONLY bloke on this planet making it and selling it is in the USA and lets just say he , well he ummmm hates me
Who could hate me U ask
! - LOL
Wet Willies seems to crack up a lot , I have no idea why, heres how mine looked when I recieved it.....
And this area was actually a case of carefully lining it up and just slapping it on, that was just WAY too easy......now it looks like this...
The Lost Mine kickout is another area that wears away on WH20....
In this 1st shot you wll see the wear mark just above the new decal I had purchased, again this came from Lil shop of Games....this was another $10.00 fix.
I wasnt totally happy with the way it was going to line up/ match up if i used the WHOLE circular decal so I decided to cut it down to just the section I needed and I would touch up around that....below is the tiny section of the decal that I ended up using.....
And here it is once in place and the area finished, it JUST misses out on lining up at the top but the rest is OK, it was a case of either having the blue angled lines JUST not marrying up OR have the black on the left side not line up and I knew what would stand out more.....
And heres a wide shot of the lower half of the PF, no-one would ever notice that decal unless they knew it was there....
Rollover Switch DecalsI wanted to quickly show what can be done with worn out area's that surround any rollover switch section.
This example is from my left loop entry on WH20, in the 1st shot you can see the 'typical' wear and tear.
Once again - Curly at Lil Shop of Games has an answer for this, he sells decals in sheets of 15 for about $10.00 that simply go over these sections......check this out....a 3 second fix.
The point of this thread is to show you that for sometimes less than $10.00 you can fix an incredibly bad, ugly and eye-catching bad section of your games PF .....worth thinking about.