HELP - EM SOLAR CITY parts wanted

[judgeboz]

I have a Gottlieb Solar City pinball missing the pop bumper (above playfield assembly). Here are the bits I need:
1 x red small tent lane guide (4.5cm long end to end)
2 x screws that go through the pop bumper
1 x globe holder
1 x metal ring + 2 bolts
1 x red skirt
1 x bumper cap (prefer 100 point with a diamond on it)
1 x pop bumper base/body
3 x drop targets (prefer white ones with a red bullseye)

Also, I purchased a new A-1496 pop bumper coil from Mark C with a diode on it - I assume I need to remove the diode if I put this into a EM pin?

Please let me know if you have any of the above parts, price plus postage to SA.

Cheers
John.

[oldpins]

Give the forum Sponsors Section a try, they may have what you want, you may want to try this link as well http://www.pbresource.com/

[Mr Pinbologist]

Also, I purchased a new A-1496 pop bumper coil from Mark C with a diode on it - I assume I need to remove the diode if I put this into a EM pin?


Cheers
John.

I just had a quick look in my Solar City manual, the correct pop bumper coils are A-4893.

The A-1496 will probably work ok, and yes you will have to remove the diode if you intend to use this coil

Cheers... Mitch

[pinnies4me]

John, I can help you with -

1 x red small tent lane guide (4.5cm long end to end)
1 x globe holder
1 x metal ring + 2 bolts
1 x red skirt

PM me you address and I'll send them over.

[judgeboz]

thanks guys for the tips and bits but someone was kind enough to send me all the bits I need and extras - free - including free express postage - unbelievable, there really are some excellent people out there.