Author Topic: Playfield post screws  (Read 105 times)

0 Members and 1 Guest are viewing this topic.

mark jackson

  • Guest
  • Trade Count: (0)
Playfield post screws
« on: May 27, 2010, 08:12:53 PM »
Hi, I'm looking for p'field post screws .... Normal on top, with the extension so that the plastic can rest on it. ... but not pointed on other end. These are the same thickness all the way and don't screw into playfield, but go through to other side. There is a 'sleeve' which the post screw into, and that sleeve is stuck to underside of playfield via three small spikes it has on its circumference. ... From memory, maybe 'Flash Gordon' or something like that had some of these.... Anyway, I really need 2 of this type of screw. Someone has changed my Drop A Card to 3" flippers via drilling new flipper holes right where the botton slingshot post was. I'm going to have to bog these holes and then get it so it's stable when the post finally goes back where it once was. Anyone got a couple, or knows where I might get em? Thanks, Mark

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Playfield post screws
« Reply #1 on: May 27, 2010, 10:21:18 PM »

Mark - These should be available from our sponsors. Often called "T-Nuts" or "Tee Nuts" - in different sizes. You can buy the metal screw to fit the size / thread. Hope that helps.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia