Hankin Cocktail Clone

[swinks]

excellent work, thanks heaps for sharing

with the plans, with some of the sections there are 2 dimensions for some areas, which ones did you use?
can you sketch up the legs and the mounting holes used?
alos don't forget a sketch for the top

[ktm450]

excellent work, thanks heaps for sharing

with the plans, with some of the sections there are 2 dimensions for some areas, which ones did you use?
can you sketch up the legs and the mounting holes used?
alos don't forget a sketch for the top

The correct dimensions are the black ones, if it says YES the black dimension is correct.
I will get the cad drawings uploaded when I get a chance

[ktm450]

UPDATE
Have painted black, cleared, added tint to take gloss off.
Bit of vinyl covering and some T-moulding
ArcadeSD card has been ordered from the US
Control panels and legs are at the powdercoaters getting coated in textured black
Still gotta upload those cad files for you Jady, sorry mate, will get around to it soon, soooo busy 

[swinks]

Still gotta upload those cad files for you Jady, sorry mate, will get around to it soon, soooo busy 

no worries

this is looking AWESOME, well done

[ktm450]

Here are the cad drawings of the side wings and the table top as PDF files for anyone who wants them

[swinks]

cool thanks

what was the distance of step in for the top?

[ktm450]

cool thanks

what was the distance of step in for the top?

20mm

[ktm450]

Received the legs and the control panels back from powdercoating, used textured black. Domed the heads on some stainless bolts added feet and end caps and installed.

[pinball god]

They d a great job there Matt. I got a powder coater to do similar on pin2000 rails and they're currently sitting in a metal bin. Good to see yours turned out well

[ktm450]

Nearly done, wiring complete 

[femto]

That is beautiful. Very nice!

[pinball god]

Quality finish to this project, well done there mate

[ktm450]

Thanks guys, I'll get some pics up of the finished product soon, just have to finish making some corner clips and put some decals on

[Strangeways]

Very nice work, Matt 

A classic table design that you have reproduced faithfully and professionally.

[goodolddays]

Looking Sweeeettt