BLACK KNIGHT and FIREPOWER on its way...

[ajlaird]

Well done, I can't believe the state of the old PF, some operators just don't care for their pins

At first I thought it was just part of the design, then I realised it was wear! Worse than the EBD that was for sale on eBay.

[Strangeways]

That's the fun of chasing these pins. You have the opportunity to buy and install repro playfields. The pin must be a "keeper" to justify the efforts.

[ddstoys]

Its awsome that you can get new playfields for these classic machines if you dont mind me asking whats a new PF worth roughly?

[tonyt]

Its awsome that you can get new playfields for these classic machines if you dont mind me asking whats a new PF worth roughly?

http://www.classicplayfields.com/store.html

[ajlaird]

So probably under $1000.

Now I know where to get EBD repro plastics at least.

[pinnies4me]

Congrats on the pickup. Looking forward to the playfield swap thread!

[beaky]

i know were you got your black knight from
i saw it on monday when i picked up my jokerz
the backglass is nice but the rest needs ,,, well ill say it needs some work
if you didn't buy it i would have bought it last monday
good score for under a grand though.
guess who he bought it off?
some one in morning side.
have you figured it out yet?
M** D*****R
do the roms come with it?
i cant see any in the cpu board in the picture.

[Strangeways]

i know were you got your black knight from
i saw it on monday when i picked up my jokerz
the backglass is nice but the rest needs ,,, well ill say it needs some work
if you didn't buy it i would have bought it last monday
good score for under a grand though.
guess who he bought it off?
some one in morning side.
have you figured it out yet?
M** D*****R
do the roms come with it?
i cant see any in the cpu board in the picture.

Good pickup, Beaky. No ROMs. Hopefully the MPU board is ok as the Sys7 boards are a pain to fix.

[ROLLERBALL]

Black knight has been picked up and is sitting in the Brisbane TNT depot...yippee...

[GORGAR 1]

Black knight has been picked up and is sitting in the Brisbane TNT depot...yippee...

I work for TNT now that's a worry only joking-good luck..

Peter

[beaky]

have you so sourced the rom set yet?
if not and you need a set let me know, i will see what i can do for you
when will the new pf arrive? or are you waiting till you get the pin first?

[ROLLERBALL]

Havnt looked for the rom set yet...I will get the machine and get MickB to get it up and running 100% with the crappy playfield before i go for the swap...Just need to get the KISS back from him first so i can sell it on ebay..then i will have more cash to spend on the BK

[ROLLERBALL]

How about this guy for the rom set???

http://cgi.ebay.com/Williams-Black-Knight-L-4-CPU-ROM-Set-Pinball-Service_W0QQitemZ220344555719QQihZ012QQcategoryZ13727QQcmdZViewItemQQ_trksidZp1742.m153.l1262

Playfield is getting the 5 coats of clear done to it now but takes them 3 weeks to do it...then it will get sent to me air freight...then cant use it for 45 days....needs to cure....

[Strangeways]

They would be the right ROMs, Paul. Just wait until you get the machine to double check - You may need speech ROMs as well - and the seller will do them as well.

[ajlaird]

Silly question, perhaps, but what's wrong with downloading the ROMs from say IPDB and burning them yourself (or asking someone else to burn them for you)?