« previous next »
Pages: [1]   Go Down

Author Topic: Gtb Quick Draw help needed  (Read 194 times)

0 Members and 1 Guest are viewing this topic.

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Wauchope NSW
Gtb Quick Draw help needed
« on: November 23, 2013, 09:46:38 PM »
Hi guys, I have a Gtb Quick Draw here a @ the moment, belonging to Cam (AP member 'big dog') one of three machines he had delivered to me for repair/restoration.

Pics below show my dilemma.. some weird looking socket that has been wired in to the backbox  *!@
I'm guessing it had a plug in relay, as i have seen this done before with this style of socket (my old Abracadabra had one of these socketed relays on the mech panel in the cab).

My question is, if anyone else reading this has a Quick Draw/Fast Draw can post a pic of their machine inside the backbox so i can see what this should look like, so i can get some idea of what i need to do to get this game up and running again. In the 3rd pic you can see some screw holes, which i assume were for the original relay in this position.

So basically i'll be looking for a replacement relay (or whatever is supposed to be there)  !@# once i know for sure  ^&^

Any help will be greatly appreciated!  Cheers.. Mitch
Logged

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: Gtb Quick Draw help needed
« Reply #1 on: November 23, 2013, 10:25:03 PM »
Ohhhh shit good luck Mitch
Logged

Offline Freiherr

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
    • The Oaks, NSW
  • Amongst clouds
Re: Gtb Quick Draw help needed
« Reply #2 on: November 23, 2013, 10:26:52 PM »
Logged
If you don't remember the 70s then you were on drugs.
If you remember playing pinball in the 70s you were having a good time.
If you don't remember anything,  then read about it here,

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: Gtb Quick Draw help needed
« Reply #3 on: November 23, 2013, 10:29:08 PM »
That's great it's just a replacement jones plug fewew
Logged

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Wauchope NSW
Re: Gtb Quick Draw help needed
« Reply #4 on: November 23, 2013, 10:29:28 PM »
Quote from: ddstoys on November 23, 2013, 10:25:03 PM
Ohhhh shit good luck Mitch

Thanks Daniel i think i might need a LOT of luck with this one  ^&^
Cam's REALLY thrown me into the deep end with a couple of these games he's sent me  *!@
Logged

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Wauchope NSW
Re: Gtb Quick Draw help needed
« Reply #5 on: November 23, 2013, 10:34:53 PM »
Quote from: Freiherr on November 23, 2013, 10:26:52 PM
Saw a photo of one of these here
http://www.pinballrebel.com/game/pins/quick_draw/quick_draw_pinball.htm

AWESOME thanks for that!!  $#$ might not be so hard after all!
I hadn't looked inside the cab yet, the rest of the connector is probably inside.. if only i'd opened up the game for a look  &^&
I just wheeled the 3 games on the trolley and stuck them in the corner.. didnt look inside any of them!
Only noticed the connector in QD because the backbox door was missing.
« Last Edit: November 23, 2013, 10:38:36 PM by Mr Pinbologist »
Logged

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: Gtb Quick Draw help needed
« Reply #6 on: November 23, 2013, 11:15:52 PM »
Good news for sure
Logged
Pages: [1]   Go Up
« previous next »