« previous next »
Pages: [1] 2   Go Down

Author Topic: Backglass clear coat?  (Read 389 times)

0 Members and 1 Guest are viewing this topic.

Offline vanhos

  • Trade Count: (0)
  • *****
  • Forum Posts:
    • Warrnambool
Backglass clear coat?
« on: December 31, 2013, 05:18:57 PM »
Had my elektra back glass out today. I noticed some one had put sticky tape on the bottom of the art work. Also you can notice the paint lifting of the glass at the top of the glass.

My question is do I clear coat it or not.

What do I do with the sticky tape on the bottom.

What type of clear coat should I use.

Any help would be great.  
Logged
HOS

Offline vanhos

  • Trade Count: (0)
  • *****
  • Forum Posts:
    • Warrnambool
Re: Backglass clear coat?
« Reply #1 on: December 31, 2013, 05:21:00 PM »
 ^^^
Logged
HOS

Offline vanhos

  • Trade Count: (0)
  • *****
  • Forum Posts:
    • Warrnambool
Re: Backglass clear coat?
« Reply #2 on: December 31, 2013, 05:22:27 PM »
 ()

Logged
HOS

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
    • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Backglass clear coat?
« Reply #3 on: December 31, 2013, 06:23:38 PM »
None of the above !

http://www.polymerclay.com.au/kscc500kryloncrystalcleartriplethickglaze0500noexpress-p-11483.html

I've been using this for over 10 years and never had an issue.

don't remove any sticky tape etc - as this was most likely used to hold the backglass art together. Removing it will remove the paint.
Logged
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline Freiherr

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
    • The Oaks, NSW
  • Amongst clouds
Re: Backglass clear coat?
« Reply #4 on: December 31, 2013, 10:39:32 PM »
Quote from: Strangeways on December 31, 2013, 06:23:38 PM
None of the above !

http://www.polymerclay.com.au/kscc500kryloncrystalcleartriplethickglaze0500noexpress-p-11483.html

I've been using this for over 10 years and never had an issue.

don't remove any sticky tape etc - as this was most likely used to hold the backglass art together. Removing it will remove the paint.

Triple thick glaze is the best by far. Get it at most artist and craft suppliers for about $18 (I think). Check youtube for correct application to backglass. A can should do 3 or 4 backglasses if you apply 3 -4 light  coats criss-crossed. You will preserve the backglass for at least 20 years or more.
Logged
If you don't remember the 70s then you were on drugs.
If you remember playing pinball in the 70s you were having a good time.
If you don't remember anything,  then read about it here,

Offline vanhos

  • Trade Count: (0)
  • *****
  • Forum Posts:
    • Warrnambool
Re: Backglass clear coat?
« Reply #5 on: December 31, 2013, 10:59:46 PM »
Heading to the big smoke in the next week any body no were in Melbourne you can buy it.
Logged
HOS

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
    • Victoria
Re: Backglass clear coat?
« Reply #6 on: December 31, 2013, 11:14:38 PM »
Quote from: Strangeways on December 31, 2013, 06:23:38 PM
None of the above !

http://www.polymerclay.com.au/kscc500kryloncrystalcleartriplethickglaze0500noexpress-p-11483.html

I've been using this for over 10 years and never had an issue.

don't remove any sticky tape etc - as this was most likely used to hold the backglass art together. Removing it will remove the paint.

+1. I have used triple thick on several glasses with no dramas at all.
Logged
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline Crashramp

  • Trade Count: (+3)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Albury
Re: Backglass clear coat?
« Reply #7 on: January 01, 2014, 12:49:53 AM »
 $#$t
Quote from: vanhos on December 31, 2013, 10:59:46 PM
Heading to the big smoke in the next week any body no were in Melbourne you can buy it.

Don't worry about running about Melbourne for it. I ordered it from here and it arrived on my door step the next day.
http://www.artscene.com.au/shopping/sprays/finishes-and-varnishes/krylon-triple-thick--crystal-clear-glaze-spray
Logged

Offline Freiherr

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
    • The Oaks, NSW
  • Amongst clouds
Re: Backglass clear coat?
« Reply #8 on: January 01, 2014, 01:13:38 AM »
Quote from: Crashramp on January 01, 2014, 12:49:53 AM
$#$t
Quote from: vanhos on December 31, 2013, 10:59:46 PM
Heading to the big smoke in the next week any body no were in Melbourne you can buy it.

Don't worry about running about Melbourne for it. I ordered it from here and it arrived on my door step the next day.
http://www.artscene.com.au/shopping/sprays/finishes-and-varnishes/krylon-triple-thick--crystal-clear-glaze-spray


$14.45 is a very good price!
Logged
If you don't remember the 70s then you were on drugs.
If you remember playing pinball in the 70s you were having a good time.
If you don't remember anything,  then read about it here,

Offline The Silence

  • Trade Count: (0)
  • **
  • Forum Posts:
Re: Backglass clear coat?
« Reply #9 on: January 01, 2014, 02:21:48 AM »
Agree with all the above, Kylon triple thick is the way to go, can spray on several good thick coats
Logged

Offline The Silence

  • Trade Count: (0)
  • **
  • Forum Posts:
Re: Backglass clear coat?
« Reply #10 on: January 01, 2014, 10:19:23 AM »
sorry for spelling, its Krylon.  Riot arts and craft stores stock it.
Logged

Offline vanhos

  • Trade Count: (0)
  • *****
  • Forum Posts:
    • Warrnambool
Re: Backglass clear coat?
« Reply #11 on: January 01, 2014, 12:15:09 PM »
Thanks heaps guys. There is one in cbd melb i will pick it up next week. Hope they have it other wise I will order of Internet.

Another question. Do I cover the clear glass were the displays are or do I just spray the whole glass. What is the reason behind covering the display sections.

I will give it lots of coats in different directions. Any other tips I need to know.

It also has a lot  of Rust on the bottom not sure what I should do with the rust.
Logged
HOS

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
Re: Backglass clear coat?
« Reply #12 on: January 01, 2014, 12:23:28 PM »
Cover the display area before spraying.. if you spray over them you get ripples etc when you look at the displays... your CC isn't as clear as glass
Logged

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Wauchope NSW
Re: Backglass clear coat?
« Reply #13 on: January 01, 2014, 05:12:09 PM »
Quote from: Crashramp on January 01, 2014, 12:49:53 AM
$#$t
Quote from: vanhos on December 31, 2013, 10:59:46 PM
Heading to the big smoke in the next week any body no were in Melbourne you can buy it.

Don't worry about running about Melbourne for it. I ordered it from here and it arrived on my door step the next day.
http://www.artscene.com.au/shopping/sprays/finishes-and-varnishes/krylon-triple-thick--crystal-clear-glaze-spray


Cool.. thanks for the link  ^^^ ^^^

Best price i've seen for TT anywhere!
Logged

Offline Freiherr

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
    • The Oaks, NSW
  • Amongst clouds
Re: Backglass clear coat?
« Reply #14 on: January 01, 2014, 05:49:11 PM »
Make sure you spray in a clean and well ventilated area. This stuff is highly flamable so put out any fags.
Logged
If you don't remember the 70s then you were on drugs.
If you remember playing pinball in the 70s you were having a good time.
If you don't remember anything,  then read about it here,
Pages: [1] 2   Go Up
« previous next »