Aussie Pinball Forums > Pinball Training 101
Replacing WMS fuses - these ones OK?
Dluth:
So F116 blew in my IJ and I want to try and get a new one before the weekend. It is a 3A slow blow fuse. Can anyone tell me whether one of these from Jaycar will do the trick (hoping to go down there at lunchtime today). Otherwise I will get the ones from RTBB but I don't want to wait for the mailman.
The thing that worries me is they are measured in mm and this is a US game - so they may not fit.
3A 3AG Slow Blow Fuse (6.35 x 30mm) http://www.jaycar.com.au/productView.asp?ID=SF2230
3A M205 Slow Blow Fuse (5 x 20mm) http://www.jaycar.com.au/productView.asp?ID=SF2230
Pop Bumper Pete:
I do not know if they will fit, but Homepin sells a packet of asorted fuses that are the right values for pinball machines
Boots:
--- Quote from: Dluth on May 09, 2014, 12:25:31 PM ---So F116 blew in my IJ and I want to try and get a new one before the weekend. It is a 3A slow blow fuse. Can anyone tell me whether one of these from Jaycar will do the trick (hoping to go down there at lunchtime today). Otherwise I will get the ones from RTBB but I don't want to wait for the mailman.
The thing that worries me is they are measured in mm and this is a US game - so they may not fit.
3A 3AG Slow Blow Fuse (6.35 x 30mm) http://www.jaycar.com.au/productView.asp?ID=SF2230
3A M205 Slow Blow Fuse (5 x 20mm) http://www.jaycar.com.au/productView.asp?ID=SF2230
--- End quote ---
Without looking in the manual the first one should fit, the second one is a much smaller fuse.
pinsanity:
The first link is the one you want for IJ.
They will fit but they will sit on the loose side in the holder as they are slightly narrower in diameter.
Or you can wait and order the correct diameter fuses from rtbb who carries the US style fuses.
Have you worked out why the fuse blew and corrected it first?
Redback:
RTBB sells fuses in packs of 5
Red
Navigation
[0] Message Index
[#] Next page
Go to full version