kiss pf progress

[RaMpAgE]

Very Cool!

You can improve the sound by adjusting the sustain pot on the sound board. Have a fiddle around with it while the game is in sound test mode.

It's not changing the sound at all and I don't know what this should sound like, I might go and get some 10k pots and change them as they could be shot.

[RaMpAgE]

Do you have any pictures or a description of the CC application / process ?

Looks GREAT BTW 

Didn't get any progress shots, but had a problem with fish eyes early in the process and was getting annoyed with them.

sanded all off and started again, problem I think was spaying too thick, so I gave it light sprays only for all of the coats which ended up being 10-15 I think, with a light sand between them.

Finishing off with 1200 grit sand with novus 3, novus 2 then wax.

Don't think I'll clear coat anymore, its too much work, messy and time consuming, the gorgar I am onto now has just been waxed after some touchups after the mylar removal.

[Strangeways]

What brand of CC did you use ?

[RaMpAgE]

What brand of CC did you use ?

Cabot's

Crystall Clear

Did some reading/research on the aussie woodwork forum.

[RaMpAgE]

Also just changed the 2 10k pots and the LS93 ic on the sound board with no change in the sound, I still get that really high pitch chip sound which shouldn't be there aparently.  I did put a cap kit through it also.

[Rod71]

Very Cool!

You can improve the sound by adjusting the sustain pot on the sound board. Have a fiddle around with it while the game is in sound test mode.

It's not changing the sound at all and I don't know what this should sound like, I might go and get some 10k pots and change them as they could be shot.

I'll upload a quick sample of mine shortly. Will give you something to work from.

[Rod71]

Here ya go. Hope it helps 

[Rod71]

Dont have a manual handy. But check to see if there is an MPU dip setting for Chimes/Tones.

[RaMpAgE]

something is up with the sound board, have to go through it all.

[The pinballist formally known as Dean Morgan]

Rich,

The CPU went OK then, as I couldnt test in a machine?

Can you post some footage of your game with sound, we will see if we can get you fixed.

[RaMpAgE]

Rich,

The CPU went OK then, as I couldnt test in a machine?

Can you post some footage of your game with sound, we will see if we can get you fixed.

I had to socket the rest of the IC's and replace the roms using 2732's as I was having intermitent boot problems but apart from that thanks for repairing the corosion etc.

Go back a page Dean and you'll see my footage there (on utube)

Could the sound prom on the pcb have a problem?

[The pinballist formally known as Dean Morgan]

Glad you replaced the Eprom as I said at the time it wasnt looking good.

[ktm450]

Looks great mate 

[RaMpAgE]

I think it has the wrong prom on the sound board and I have no way of burning a new one with the programmer I have, is anyone able to do this for me?

It has 729-51 on the prom, it should be 729-18 - am I onto something here for the sound to be right?

A 74S188 will need to be programmed with the file attached here.

Thanks

Edit: I forgot to mension that the board is an

AS-2888-4 which I believe is for a

Paragon, Harlem Globetrotter, Dolly Parton

A kiss sound board needs to be an

AS-2888-3 which is for

Kiss & Star Trek

Well thats what the www told me anyway



[attachment deleted by admin]

[The pinballist formally known as Dean Morgan]

Ritchie,

see this link http://www.pinball4you.ch/okaegi/rep_soundold.html

728 - 51: is for Paragon, Harlem Globetrotter, Dolly Parton

You need the correct eprom as you said

Cheers
Dean