Author Topic: IDC-156F Wire Insertion Tool  (Read 703 times)

0 Members and 1 Guest are viewing this topic.

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Newcastle, NSW
IDC-156F Wire Insertion Tool
« on: April 14, 2015, 07:57:46 PM »
This has been test printed and used and works perfectly in multiple brand IDC fittings. I designed and made this as I bought a $10 plastic version and probably did 15 plugs and the plastic fingers bent over and the tool was a throw away.

When you purchase the wire inserter also purchase the IDC-156F Tool Handle so you can do all the typical plugs inside a pinball machine. The tool tip simply slides into the handle via the dedicated guide groove and inside the handle is a small locking piece so it will not fall out. The tool tip is double ended and depending on the material that you choose to get, the tip should last you a life time.

Search "SwinksIDC" for both tool parts when ordering. This is not just for pinball wiring but any crimping of IDC-156F fittings.


https://www.shapeways.com/search?q=swinksidc
« Last Edit: April 14, 2015, 08:23:43 PM by swinks »