Author Topic: Guess what's at the printers?  (Read 8212 times)

0 Members and 1 Guest are viewing this topic.

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Victoria
Guess what's at the printers?
« on: May 01, 2009, 08:54:00 PM »
 :D

“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline Geoffh

  • Trade Count: (0)
  • ****
  • Forum Posts:
  • Melbourne Vic
Re: Guess what's at the printers?
« Reply #1 on: May 01, 2009, 09:04:57 PM »
Great stuff guys.

Need some pics when they are on the cab  @@* @@*
« Last Edit: May 01, 2009, 10:16:14 PM by Geoffh »

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Victoria
Re: Guess what's at the printers?
« Reply #2 on: May 01, 2009, 09:18:51 PM »
You bet Geoff! Turns out a fellow who did some work for me at one of my businesses was able to assist. He does signwriting etc and when I spoke to him the other day on a different issue, we got talking about Coconut Island. He is a pinhead himself with a game at home (soon two probably! :) and he told me he could print the cab art for us, and suddenly it is all happening.

Great day !!
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Guess what's at the printers?
« Reply #3 on: May 01, 2009, 09:32:40 PM »

Good stuff guys - not far to go until Expo !
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Guess what's at the printers?
« Reply #4 on: May 01, 2009, 10:04:25 PM »
Fantastic its great when things fall into place we will have to have a test session soon i be thinking

Offline ajlaird

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Greensborough, Melbourne
  • Go Ahead, Make My Day
Re: Guess what's at the printers?
« Reply #5 on: May 01, 2009, 11:43:05 PM »
Excellent - we are looking forward to having a bash on it at Expo!

Great that you could find another pinball fan who can print them for you.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Guess what's at the printers?
« Reply #6 on: May 02, 2009, 12:13:33 PM »
Can your friend print other thinks say a backglass? Not onto glass obviously

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Victoria
Re: Guess what's at the printers?
« Reply #7 on: May 02, 2009, 12:35:41 PM »
Dunno Daniel. This was a stretch for him, he's using someone else's equipment for the actual printing. For the CI translite we are going simple as time is tight and it will be just a gloss print with some fluros behind.
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline spacies

  • Trade Count: (0)
  • ****
  • Forum Posts:
Re: Guess what's at the printers?
« Reply #8 on: May 04, 2009, 08:29:00 PM »
Hi guys.

I hope everything is okay with the artwork and you friend didn't have to spend much time with it to get it to print mode. Like everyone else I am looking forward to seeing it on the cabinet.

Sorry everything got crazy busy here but it looks like it has worked out well.
Thanks again for letting me have a go :D

Offline Geoffh

  • Trade Count: (0)
  • ****
  • Forum Posts:
  • Melbourne Vic
Re: Guess what's at the printers?
« Reply #9 on: May 04, 2009, 08:34:35 PM »
Welcome back Spacies long time no see

You did tremendous work on the artwork Spacies.  @@*

Think It will come up great  $#$


Offline ktm450

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong, Victoria
Re: Guess what's at the printers?
« Reply #10 on: May 05, 2009, 12:19:27 PM »
Fantastic, look forward to seeing it layed on the cab

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Victoria
Re: Guess what's at the printers?
« Reply #11 on: May 06, 2009, 12:51:15 AM »
Hi guys.

I hope everything is okay with the artwork and you friend didn't have to spend much time with it to get it to print mode. Like everyone else I am looking forward to seeing it on the cabinet.

Sorry everything got crazy busy here but it looks like it has worked out well.
Thanks again for letting me have a go :D

Welcome back mate, and there's been no dramas yet (I hope - haven't heard yet that they are ready). Hopefully in the next day or so we'll see the results of your excellent work!
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline spacies

  • Trade Count: (0)
  • ****
  • Forum Posts:
Re: Guess what's at the printers?
« Reply #12 on: May 06, 2009, 08:25:38 PM »


Welcome back mate, and there's been no dramas yet (I hope - haven't heard yet that they are ready). Hopefully in the next day or so we'll see the results of your excellent work!

Awesome. I was always meaning to tidy up the layers but never got around to it. That doesn't need to be done for printing though but it just makes me look amateur when compared to a pro.

Look forward to seeing the photos when they are on the cab. From what I can see in the pic you posted it looks great and the colours are spot on.

Thanks again and if you need help applying them let me know :D