Author Topic: Bally Bow And Arrow Restoration  (Read 15931 times)

0 Members and 1 Guest are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Bally Bow And Arrow Restoration
« on: December 29, 2017, 02:39:20 PM »
Long overdue Update ;

The playfield has been cleared and the objective of having the finished "toned down" to look original has worked out very well. The playfield is not polished to look like a 90's clearcoat, rather, it is dulled down to look like a varnish. The reason for the clear is because so many inserts had dropped, and cupped. I did refresh the white areas and finish off with some rough linework. The intention was to solve the issue with the dropped inserts.









The underside of the playfield was stripped and documented ;











Moving on to the cabinet ..





The Door ;








The door was stripped, and some parts were repainted. No replating this time. Parts were cleaned with the Ultrasonic, then the tumblers ;








Side of the cabinet - looks much better. I use "simple Green" for these jobs as it does the same cleaning as Nifti, but it is not as aggressive.





End of the first update..
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia