Aussie Pinball Forums > Equipment

System 1 connectors

(1/3) > >>

Crashramp:
Hi guys, where do I find Connectors used on Gottlieb system 1 machines? I've just started some pre restoration clean up work on my Count-down machine and I'd like to replace the display and board connectors but I'm not sure where I can buy them. Thanks in advance.





Sent from my iPad using Tapatalk

pinnies4me:
I usually keep the connectors and replace the pins. Rtbb has some.

http://www.rtbb.com.au/catalog/product_info.php?products_id=1407

For the driver to cpu interconnect you must get one of these as saves heaps of work, look for sys 1/ sys80 harnesses on left pane

http://www.bigdaddy-enterprises.com

Crashramp:

--- Quote from: pinnies4me on January 29, 2017, 08:21:29 PM ---I usually keep the connectors and replace the pins. Rtbb has some.

http://www.rtbb.com.au/catalog/product_info.php?products_id=1407

For the driver to cpu interconnect you must get one of these as saves heaps of work, look for sys 1/ sys80 harnesses on left pane

http://www.bigdaddy-enterprises.com

--- End quote ---

Thanks Nick,

I didn't realise that these were the .156 pins. I have plenty of them but I'd still like to buy new connectors if they're available somewhere. I also have a new Pascal 4 in 1 board to install down the track. It's packed away in a cupboard at the moment so I haven't had much of a look at it yet. Will I still need the interconnecting board to board harnesses with the 4 in 1?

pinnies4me:
No mate, the four in one won't need that.

Crashramp:

--- Quote from: pinnies4me on January 29, 2017, 10:27:24 PM ---No mate, the four in one won't need that.

--- End quote ---

Great, thanks

Navigation

[0] Message Index

[#] Next page