Author Topic: System 1 drop target switches  (Read 180 times)

0 Members and 1 Guest are viewing this topic.

Offline Crashramp

  • Trade Count: (+3)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Albury
System 1 drop target switches
« on: November 03, 2017, 02:13:52 PM »
Hi guys,

Does anyone know what the part number is for the 2 different switches used on system one drop target banks? I need to replace a few on the Count-Down I'm restoring but the number for either switch isn't in the 1980 Parts Catalog that I have.

One switch type sits behind each of the targets below the playfield (4 per target bank on Count-Down) and the other (1 of) comes up through the playfield and sits behind a rebound rubber behind the targets when they drop.


Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Victoria
Re: System 1 drop target switches
« Reply #1 on: November 04, 2017, 06:36:36 AM »
Hi mate are yours missing altogether? If not, I have rebuilt  these if needed previously. If they are missing let me know I might have some.
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that makes the whole universe disappear.”

Offline Crashramp

  • Trade Count: (+3)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Albury
Re: System 1 drop target switches
« Reply #2 on: November 04, 2017, 10:03:13 AM »
Hi mate are yours missing altogether? If not, I have rebuilt  these if needed previously. If they are missing let me know I might have some.

Thanks Nick, it’s mainly the one that comes up through the playfield behind the targets that are the issue. Of the 4 target banks 3 of them have a leaf broken off and the 4th has dropped a contact. The switches behind the targets may come up ok with a bit of a clean but I’ve only done the one bank so far so I’m not 100% sure yet.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Australian Pinball Restorations
Re: System 1 drop target switches
« Reply #3 on: November 04, 2017, 11:41:37 AM »
Can you attach a photo Adam ? I'll see if there's anything suitable I can assist with.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

APR - Australian CPR Distributor

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline Crashramp

  • Trade Count: (+3)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Albury
Re: System 1 drop target switches
« Reply #4 on: November 04, 2017, 04:08:33 PM »
Can you attach a photo Adam ? I'll see if there's anything suitable I can assist with.

Will do, thanks Nino. I’m in Melbourne until Monday night so I’ll take some pictures when I get home.

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Newcastle, NSW
Re: System 1 drop target switches
« Reply #5 on: November 04, 2017, 08:18:24 PM »
I have a scrapped count down playfield that I might have some of those parts if you want them?