Author Topic: New Product - inkochnito's Bridge Board  (Read 1030 times)

0 Members and 1 Guest are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
New Product - inkochnito's Bridge Board
« on: January 09, 2018, 01:11:41 PM »
RTBB has inkochnito's Bridge Board in stock ;

This Bridge Board addresses the missing fuses in the 18V (controlled lamps) and 34V (solenoids) circuits before the bridge rectifiers.
The life expectancy of the Capacitor in circuit is 10 to 15 years, and is already long past for all machines. All these problems can be fixed by using this Bridge Board.

On this board are the bridge rectifiers, capacitor replacements and the new added fuses. Simple screw connections, no soldering skills needed. The bridge rectifiers are on the back side of the board and are also used for mounting the board in the back box. The board also has 2 leds for checking if the exit power is present.

List of compatible games (Williams and Data East) - http://home.kpn.nl/p.koch3/Supported_games_list.htm

Instructions - http://home.kpn.nl/p.koch3/Inkochnito_Bridge_Board.pdf

This Bridge Board was designed and produced by Peter "Inkochnito" Koch.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia