Author Topic: Last Action Hero  (Read 6772 times)

0 Members and 1 Guest are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Last Action Hero
« on: October 26, 2008, 10:58:26 AM »

Are you sure that's the same Ramp ?? %.%

Excellent work..Nifti cleans anything - EXCEPT - Playfield plastics !

Here's a tip - Remove the two metal ball guides, and "regrain" them with 360 grit wet/dry sandpaper and windex.. They will look new. If you have a buffing wheel, polish the four screws - if you don't have a buffing wheel - Grab some Brasso, a couple of drops on a rag and then rub the head of the screw on the rag.... Put it bacj together - Would take 5 minutes  #*#

Never spray anything on the playfield.. First pass of a filthy playfield - Grab a old ice cream container and half fill with water.. Spray nifti 3 or 4 times into the container and dip the rag in to the container - clean the playfield.. This prevents any liquid going directly on the playfield..

Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia