Aussie Pinball Forums > General Mods

Custom Stainless Steel Ball Shooter Rods only

(1/2) > >>

pinoffski:
 I make custom stainless steel pinball shooter rod that is made with a (medical grade) 304 stainless steel ball attached to a Bally/Williams rod..
 This will suit pinball machines from the 90's like CV, TOM, TOTAN, TAF etc.

They will also fit on older machines Bally/Williams pinball’s if you like the look and feel of them.
See Centaur pic

Note:For Stern pinball’s I have successfully put them on them if you are willing to do some a modification the bushes in the Stern Ball Shooter Housing – 535-5067-02
If it is tight in the bushes just drill to suit (with a 3/8” drill Dia 0.375” and in metric 9.53mm)
Stern Shooter rods diameters are 9.45mm

For the correct length for a stern I supply stainless steel spacer to suit..

Shooter rod is $70aud

Spacer is for free if you are willing to put them in a stern pinball

 Postage would be $10.60
 Express Postage $13.60
here is some pics

pinoffski:
some more pics
shooter rod that i made for centaur is a blackend ball

punkin:
Absolute quality gear too. They feel stunning in the hand. The weight is perfect.


I'm going to get a spare stern plate so i don't have to drill my Aerosmith LE to get one on there instead of the plastic Jackie handle.


Buy with confidence folks, these are beautiful.

pinoffski:
Thanks for the feed back punkin
here is a link for stern
https://www.rtbb.com.au/product/stern-ball-shooter-housing-535-5067-02/

or you could use a
Williams/Bally Ball Shooter Housing – 21-6645-1
+ shooter housing sleeve

punkin:
Thanks mate, ordered. They're just as at home on a newer machine as an older machine. (and they slot straight into the American Pinball machines)

Navigation

[0] Message Index

[#] Next page