Author Topic: Bally mpu 35 stopped working......ITS NOW WORKING AGAIN  (Read 1656 times)

0 Members and 1 Guest are viewing this topic.

Offline dj10555

  • Trade Count: (+1)
  • ****
  • Forum Posts:
Re: Bally mpu 35 stopped working
« on: August 24, 2009, 10:18:04 PM »
If you have access to a logic probe, I would check that you have a clock signal coming from U16 up to the CPU.

It would be a pain to do but if you re-jumperd the Xenon MPU temporarily to match the Dolly Paton, you could then swap the Roms and confirm that U6 is not at fault.