WILLIAMS WORLD CUP REBUILD

[ddstoys]

Alos cleaned out the cabinet with a paint brush and vacuum cleaner still need to remove all the knockers and bells for a polish ive already buffed the chime plates as some Wanker had stuck some rubber pads underneath to muffle the chimes 

[MartyJ]

Great work Daniel.

I take my hat off to you on this.  I can say I'm up for a challenge when it comes to rebuilding a pin but I would have walked past this one.  You've transformed it back to a great looking machine and I hope the new owner appreciates all the hard work you've put into it.

Awesome stuff.

[ddstoys]

Thanks Marty
                  The new owner will appreciate the hard work i built him one of my pinball coffee tables and he is always telling people about that.    And im really glad i held onto it..


Here is a picture of inside the head and dont worry i will solder the lamp capacitor in place ive only Clipped it as its not the correct size Cap but its close

[Strangeways]

Good work Daniel !

Most of the machines from this Container LOOKED bad - but with a bit of time and elbow grease - they can all find themselves in Collections.

[ddstoys]

Well io spent the evening cleaning up the playfield came up pretty well

[ddstoys]

 

[Strangeways]

Good Work Daniel - How did you go with the Backglass transport ?

[ddstoys]

A member here will be picking it up once he can arrange to get it. Once he has it ill send him your box and get it posted back to me safely

[The pinballist formally known as Dean Morgan]

Thanks Marty
                  The new owner will appreciate the hard work i built him one of my pinball coffee tables and he is always telling people about that.    And im really glad i held onto it..


Here is a picture of inside the head and dont worry i will solder the lamp capacitor in place ive only Clipped it as its not the correct size Cap but its close

Daniel, out of interest what size cap is it?  The 30,000 mfd are difficult to come by, I am using a 33,000 mfd in time warp and this seems Ok?

[ddstoys]

Well i finished the cleaning and polishing and im very happy with the results.

Post were done with soapy water and a toothbrush
The plastics were done with Novus

[ddstoys]

I was short a few rubber otherwise the playfield would be finished im using brand new chrome acorn nuts instead of the orignal white plastic ones it originally had.  Brand new globes all round  And all post screws have been buffed (Talk about looking after him)

[ddstoys]

Here it is backtogether

[Strangeways]

Looks AWESOME !

Remove the outhole bases and clean with Nifti - 

I can't wait to see it with the replacement backglass.

[MartyJ]

Nice work Daniel.....With the backglass on it will be a very solid clean machine.!

[The pinballist formally known as Dean Morgan]

Thats come up very well Daniel, Playfield is in good nick under 20 years of Filth!