Author Topic: Random reset on LAH (fixed!)  (Read 7679 times)

0 Members and 1 Guest are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Random reset on LAH
« on: November 23, 2008, 03:14:26 PM »

Marty - I'd be checking the Fuse Holders on the Power supply. They are notorious from problems like the one you describe.

Check connectors - Which I think you have done.

Rebuild the 5V section.

That should cover it, I'd think.

Fuse holders done on Power Supply.  Connectors look OK...None appear burnt or discoloured and seem to fit OK (ie not loose)...

I think perhaps the 5v needs looking at...I've got all the bits except the 2N6059 and 330uf 35v cap.  I will order some from futurlec.com.au and see how I go.....




Go ahead with the rebuild.. This is a new issue with the game - isn't it ?

Just wondering if the reset is caused by any particular action on the playfield  - like hitting the same target etc.. I've seen a switch wired incorrectly which threw the switch matrix on a Bally/Williams and it caused a "slam tilt" once in a while..



Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia