New Backglass from CPR

[Fezlar]

I bought a new backglass for my williams FLASH fro CPR. Does anyone know whether I should seal the back of it with clearcoat as seems to be the standard thing to do with an older glass.

[Extra Ball]

its just whatever you comfortable doing

The only thing you should do is install #47 bulbs behind it.

[humpalot]

Chances are it won't fit as they made them too big 

[The pinballist formally known as Dean Morgan]

Chances are it won't fit as they made them too big  

Yes thats a good point, were they all made too big or did Wayne have seconds?  Most likley all too big, which I hope is not the case for Fezlar's sake.

[Retropin]

No need to seal a new glass.. look after it and run #47's behind.. shell be OK. Sealing a glass isd abit of a gamble in itself,,, if the seal shrinks it pulls the whole lot off... if artwork is adhering to glass as is - no need to seal

[Strangeways]

As mentioned - No need to seal. Use #47 bulbs behind the glass and #455 behind the word "FLASH".

Let us know how your glass is fitted as there were issues with one glass bought locally (was too big)