Author Topic: 1970 BALLY SUPER 7 BINGO MACHINE  (Read 5034 times)

0 Members and 3 Guests are viewing this topic.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
1970 BALLY SUPER 7 BINGO MACHINE
« on: February 07, 2010, 06:11:24 PM »
Yes i did say i was taking a break from pinball but a good friend offered me this machine and id always been told they are super hard to fix and i always wanted to take up the challenge.       This machine looks complete the backbox has been dropped and the backglass is broken.   Only other think i can visually see is a burnt out coil.

   These thigs are damn heavy and awkward the backbox is almost as big as a pinball body

Offline d3vlin

  • Trade Count: (0)
  • ***
  • Forum Posts:
  • geelong
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #1 on: February 07, 2010, 06:16:52 PM »
heavy and awkward hope we dont have to move that thing ever again.

Offline The pinballist formally known as Dean Morgan

  • Trade Count: (+3)
  • ******
  • Forum Posts:
  • Berwick Vic
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #2 on: February 07, 2010, 07:26:36 PM »
All the weight is in the backbox in these, not much installed in the cabinet
Im a Gottlieb Man - System 1 & 80 Rock

Offline millsy

  • Trade Count: (+2)
  • ******
  • Forum Posts:
  • Illawarra
  • pinballaustralia.com
    • Pinball Australia
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #3 on: February 07, 2010, 07:39:50 PM »
Pumped plenty of coins into these machines in the seventies.  &&  &&
You will be a EM technical expert Daniel if you can tackle these machines. *%*
Good site for bingos here http://bingo.cdyn.com/
Looks like the coin door is the same as my Bazaar, What are you doing to the machine ?
Kev
« Last Edit: February 07, 2010, 07:42:29 PM by millsy »
pinballaustralia.com

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #4 on: February 07, 2010, 07:48:18 PM »
All the weight is in the backbox in these, not much installed in the cabinet

Thats what i thought then i went to move the cabinet and that is heavy aswell  @.@




Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #5 on: February 07, 2010, 07:50:21 PM »
Pumped plenty of coins into these machines in the seventies.  &&  &&
You will be a EM technical expert Daniel if you can tackle these machines. *%*
Good site for bingos here http://bingo.cdyn.com/
Looks like the coin door is the same as my Bazaar, What are you doing to the machine ?
Kev

Well Kev
         Hopefully i can get the old girl running 100% then ill most likely strip it down for a full rebuild the cabinet is splitting from where it was dropped so will need some work to repair as its holding alot of weight and id hate it to fall onto any of my other machines....

   Biggest problem is i might have to part with a machine if i keep this one  !!!

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #6 on: February 07, 2010, 08:13:14 PM »

Bally bingos are very different beasts and would be the most difficult EM to repair of the era. VERY HEAVY - and it is all "head". My old man used to call these machines "The original computer". I have paperwork on some 50's Bingos, but no 70's Bingos. Even have some NOS Stepper units in storage.

Let me know if you need anything Daniel and good luck  ^^^
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #7 on: February 08, 2010, 10:16:13 PM »
Well spent a few hours this afternoon on the old beasty.   At this stage its just a mecahnical rebuild to make sure i can get it going once its running ill strip it down again for a good scrub up.   This afternoon i removed all the internals of the cabinet and rebuilt all the stepper units, cleaned and adjusted all the relays and cleaned and adjusted all the switches.   Each relay ans stepper switch was tested one at a time with a multi meter to make sure they were all working propery as once its back in the game these wont be accesible.

 I also repaired the rodent damaged wires

First photo is the internal board.

Second and third are what i have to tackel next  EEEEW   if an Em pinball worries you this will give you nightmares

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #8 on: February 08, 2010, 10:18:35 PM »
Hereare a few photos of the empty cabinet and the ball chute before and after a quick clean and vacuum

Offline v200juke

  • Trade Count: (0)
  • ***
  • Forum Posts:
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #9 on: February 08, 2010, 11:52:37 PM »
Lift that head on and off machine a few times and you will end up looking like a condom full of walnuts. Bloody heavy things. Bingos are great but not many people take time to understand them. Get this monster going then find a 50s machine with wood rails. You will be hooked. There are not many of us bingo nuts out there.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #10 on: February 11, 2010, 10:21:05 PM »
Lift that head on and off machine a few times and you will end up looking like a condom full of walnuts. Bloody heavy things. Bingos are great but not many people take time to understand them. Get this monster going then find a 50s machine with wood rails. You will be hooked. There are not many of us bingo nuts out there.

Got a few 50's Ballys in Storage - Miami Beach, Sun Valley Miss America, Key West, Night Club, Laguna Beasch, Show Time, Ballerina, Cypress Gardens..

I have some NOS steppers, Coils, motors.. One Day I'll get to them !

When they are working - They are simply awesome to play and enjoy.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #11 on: February 11, 2010, 11:30:28 PM »
By the time they are out of storage Nino i should be a pro and be able to help you with the restores

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #12 on: February 11, 2010, 11:46:54 PM »
By the time they are out of storage Nino i should be a pro and be able to help you with the restores

Here's a "before" and "after" shot of the Miami Beach I did 7 years ago (still looking for a good playfield);



Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline mbusetti

  • Trade Count: (0)
  • *
  • Forum Posts:
  • Melbourne, Australia
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #13 on: February 18, 2010, 08:25:30 AM »
Pinball’s are fantastic, Bingo's are just so much more addictive and challenging.  Here’s some photo’s of my current line up with 1961 Acapulco currently getting the restore treatment.

Offline silverball

  • Trade Count: (0)
  • ******
  • Forum Posts:
Re: 1970 BALLY SUPER 7 BINGO MACHINE
« Reply #14 on: February 19, 2010, 02:59:16 PM »
 <..>