More pics, Transformer/power supply panel being refurbished.
I stripped the board of all components, took off the fuse labels and gave the plywood a light sand then gave it a couple of quick coats of clear acrylic to pretty it up a bit
I didn't go silly with the clear.. just enough to seal it a bit and no more, so its not so glossy as to look out of place.
While the clear was drying i scanned the labels and cleaned up the images and printed new ones to staple onto the board. I used plain A4 paper and covered them with some mylar to protect them, so they'll be easy to clean!
All of the wiring and transformers were cleaned while it was apart, using Nifti and rag, and a toothbrush for the stubborn bits.
I stapled the new labels in place and reassembled everything, then refitted it all back into the cabinet.
