Author Topic: SeaWitch  (Read 310 times)

0 Members and 1 Guest are viewing this topic.

Offline braddo

  • Trade Count: (0)
  • *****
  • Forum Posts:
SeaWitch
« on: March 24, 2010, 06:23:21 PM »
OK Seawitch is here. It arrived strapped to a pallet with bubble wrap and then wrapped again in plastic. Very well packed! Unpacked it set it, it works fine plays great.
Payfield - Some wear around inserts and some ball swirl but that's about it, just needs a good clean up. Mostly covered in mylar or contact which i may remove but is un-noticable so i might just leave it. One broken plastic, the blonde babe on the left, but considering the speed of this machine i'm not surprised I might just put perspex under it, or may get repro plastics. Cab - is a bit faded and dirty and a bit stained too but i reckon will clean up beutifully.
Backglass - the dark blue has been touched up a fair bit with an airbrush or spraygun. A fair bit of cracking in the paint when you look from the back, BUT, from the front, looks pretty good! When the machine is turned off and no lights behind it, it looks great, my first impression was WOW, so i think it's passable until a repro comes along, if not i can live with it no prob.

As far as the dealer (for those who were following the Seawitch Ebay thread), he was OK. Did not stuff around, the thing works (I'll have a closer inspection inside though), it arrived promptly. So overall i would say not a bad experience.
One gripe, the pics on Ebay weren't the best, they made the broken plastic and touched up backglass un-noticeable, but, I'm happy I did not pay top $$$ for this and I can't believe i own a SeaWitch $#$.

Just a couple of quick crappy camera phone pics...
WTB (or possibly trade) - 1980 Stern ALI

Offline MartyJ

  • Trade Count: (+4)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Melbourne
Re: SeaWitch
« Reply #1 on: March 24, 2010, 06:28:04 PM »
Great stuff, awesome to own.

Wasn't Seawitch one of the backglasses Johngreatwich was experimenting with?   *!@

Offline v8racefan

  • Trade Count: (+2)
  • ******
  • Forum Posts:
  • Gold Coast Queensland
Re: SeaWitch
« Reply #2 on: March 24, 2010, 06:32:06 PM »
Well done braddo  ^^^

Glad to here that this transaction went well, seems he has changed his ways in recent times.
Pinballs in my collection Elvira, Stern Grand Prix, Bally Corvette, Creature from the Black Lagoon, Judge Dredd, Black Rose and Data East Guns n Roses.

Online Ballywannabe

  • Trade Count: (0)
  • *****
  • Forum Posts:
  • Perth
Re: SeaWitch
« Reply #3 on: March 24, 2010, 07:56:03 PM »
Great stuff, awesome to own.

Wasn't Seawitch one of the backglasses Johngreatwich was experimenting with?   *!@

Yes, it was - in fact I bought one!  Not as good as a screen-print when lit up, but a very tidy piece of work (thanks John!).  I have used coloured globes behind the backglass with good effect.  Following is (hopefully) a lit and unlit shot of the backglass and a photo of the LH outlane area that you (Braddo) said in 'the other place' you were going to remove a post from, but I could not work out why.  Also note the sling plastic is a CPR (with the dark blues), while the bikini girl is original.

cheers
Ian


Offline ajlaird

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Greensborough, Melbourne
  • Go Ahead, Make My Day
Re: SeaWitch
« Reply #4 on: March 24, 2010, 08:05:55 PM »
Well done, it is exciting to pick up a machine on your dream list!

Offline braddo

  • Trade Count: (0)
  • *****
  • Forum Posts:
Re: SeaWitch
« Reply #5 on: March 24, 2010, 10:35:42 PM »
Great stuff, awesome to own.

Wasn't Seawitch one of the backglasses Johngreatwich was experimenting with?   *!@
and a photo of the LH outlane area that you (Braddo) said in 'the other place' you were going to remove a post from, but I could not work out why

Ian the reason for me wanting to remove the outlane posts is because even though I've only had limited games on Seawitch so far (I can't get into any pin I own until it is cleaned), I just go for the hardest settings straight out, and the limited games i have played just favoured the inlanes a bit too much due to the posts. Maybe I'm used to Gorgar?? %.%
But, by removing these outlane posts i'm leaving the valuable plastics basically sitting in mid-air, and because the ball on this machine leaves the playfield A LOT I can see some damage to new and expensive plastics happening. I'll work it out.
It always takes me about a month of owning a machine to really appreciate it, but I can say straight out that after only 1 day and a handful of half-arsed games that this could possibly be the best pinball machine I have ever played (will be hard to beat RollerBall's BlackHole plus a number of others I have played) . Seawitch has a great ruleset for the year of production, I'm still a tad confused!! Time will tell.
« Last Edit: March 24, 2010, 10:54:11 PM by braddo »
WTB (or possibly trade) - 1980 Stern ALI

Offline ROLLERBALL

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • HEATHCOTE sydney
Re: SeaWitch
« Reply #6 on: March 24, 2010, 11:09:02 PM »
your on fire Brad...mate I should have grabbed that machine...was my favorite game to play on pinmame...looks like a corker of a game $#$...so when is your first meet???Put me down on the list..lol
NeRdS   N E R D S

NERDS nerds NErdS

Nerds NERds and P NUTZ

Offline braddo

  • Trade Count: (0)
  • *****
  • Forum Posts:
Re: SeaWitch
« Reply #7 on: March 24, 2010, 11:25:31 PM »
Paul at least you know where the machine is and if I decide to pass it on I'll let you know ^^^. Come around for a game.
Mate knowing your reputation, if you did grab it you'd probably only have kept it for a couple of months anyway. %.%
And yeah a meet in the future could now be on the cards, even though one machine i own used to be yours, then again you could probably go to any meet in the country and play a pre-owned machine %.%.
« Last Edit: March 24, 2010, 11:29:52 PM by braddo »
WTB (or possibly trade) - 1980 Stern ALI

Offline Rod71

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Illawarra NSW
Re: SeaWitch
« Reply #8 on: March 25, 2010, 12:16:38 AM »


Ian the reason for me wanting to remove the outlane posts is because even though I've only had limited games on Seawitch so far (I can't get into any pin I own until it is cleaned), I just go for the hardest settings straight out, and the limited games i have played just favoured the inlanes a bit too much due to the posts. Maybe I'm used to Gorgar?? %.%


A lot of games have more than 1 hole for the outlane posts to screw into.  Even if that post is moved to the left a mm or so, it'll make a difference.  Worth removing the post to have a look at least.


Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: SeaWitch
« Reply #9 on: March 25, 2010, 01:31:18 PM »

Looks like a really nice game - and a FAST one at that  #*#
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline punter

  • Trade Count: (0)
  • *****
  • Forum Posts:
  • illawarra
Re: SeaWitch
« Reply #10 on: March 25, 2010, 06:36:07 PM »
Good score for you Brad to pick up a machine that was on your wish list.You know that however it looks now it will come up heaps better with a good clean and wax ect.Look forward to coming over and having a game on this and your others soon.