« previous next »
Pages: [1]   Go Down

Author Topic: Flipper power supply  (Read 852 times)

0 Members and 1 Guest are viewing this topic.

Offline brizzyboy22

  • Trade Count: (0)
  • *
  • Forum Posts:
Flipper power supply
« on: April 09, 2011, 04:35:41 PM »
Hey guys,



So i cant get my flipper to work I have an ATX PC power supply and a +48v 3.2A SMP supply (Switch Mode Power).

I am tring to run two FL-17636 flipper but the switch mode seems to cut out I am unable to get any schematics to this machine seeing as its Home built.

so schematics or any help would be GREAT.
Logged

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
    • Melbourne, Vic
Re: Flipper power supply
« Reply #1 on: April 09, 2011, 08:31:06 PM »
Quote from: brizzyboy22 on April 09, 2011, 04:35:41 PM
Hey guys,



So i cant get my flipper to work I have an ATX PC power supply and a +48v 3.2A SMP supply (Switch Mode Power).

I am tring to run two FL-17636 flipper but the switch mode seems to cut out I am unable to get any schematics to this machine seeing as its Home built.

so schematics or any help would be GREAT.

can you post some pics of the boards so i can work out what type of system it is?
Logged
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Flipper power supply
« Reply #2 on: April 09, 2011, 10:48:41 PM »
Beaky is right - more details please.

It is my guess that the ATX supply is unable to handle the high surge current when the flipper colis energise?? They  will draw as much as 20 amps initially and I am guessing your PC supply is shutting down because of that??

Has this setup EVER worked or are you putting it together for the first time???
Logged
Replacement Pinball PCBs that remain faithful to the originals

Offline Redback

  • Trade Count: (0)
  • *****
  • Forum Posts:
Re: Flipper power supply
« Reply #3 on: April 10, 2011, 11:37:43 AM »
Hopefully you are using the
+48v 3.2A SMP supply (Switch Mode Power).
for the flippers.

Is 3.2 amps enough?  I believe the one i"m using is 7amps. (probably but too lazt to look up)

Make sure the neg is wired.

Mine has tested fine with a simple switch Mosfet set up, aurdino and some resistors.

All the best,
Red
Logged
Found hobby, now need coin
Pages: [1]   Go Up
« previous next »