ELEKTRA LOWER FLIPPERS NOT WORKING IN GAMEPLAY

[ddstoys]

Hi guys anyone familiar wth Elektra?      Has a new Altek MPU fully working Solonoid board (Thanks Chris)  All coils work in test all normal flippers work and the ones on the lower playfield work wen holding in the test button.  When in play you drain a ball the lower playfield serves its ball but no flippers???

[Ballywannabe]

The lower flippers have their power switched by one of the under playfield relays.  Usually these have a lamp associated with them that is needed for the relay to work correctly.  Also, check for poor/cold solder joints on the relay board.  I will try and have a look at mine tomorrow to see exactly what the set-up is.

Hope this helps!
Ian

[ddstoys]

Finally gotten around to my own machines again and managed to get this going 100% ended up being a fault on the auxiliary Lamp driver board.