« previous next »
Pages: 1 [2]   Go Down

Author Topic: One for Queenslanders  (Read 790 times)

0 Members and 7 Guests are viewing this topic.

stuba

  • Guest
  • Trade Count: (0)
Re: One for Queenslanders
« Reply #15 on: February 14, 2009, 03:20:34 PM »
Quote from: Strangeways on February 14, 2009, 01:40:31 PM

For the price you paid - That's a steal  @@*

Best thing about this game is that you are forced into respray. Looking at the playfield and backglass - the respray will compliment the rest of the game. RTBB holds a crapload of GTB parts, so you might only need a small order from PBR for Game Specific parts. Plastics are not available, but you can ask PBR if they are considering making them. I can't see the chime box.

Congrats - I would be very pleased if I scored this game..

How "game" are you to fire it up ? What problems did the seller describe to you ?

thanks. i will fire it up, bout to get some visitors so prob tommorrow. i agree about the respray - no moral/ehtical dliemmas lol chime box is intact under that flap of carboard on the bottom right of the inside cab pic (the cardboard which is very obvioulsy a box flap(!) is screwed to the top of the chime box (?wtf) maybe to deaden the sound? em volume control?. seller said it was powering up but not starting a game so don't think there is much wrong but i'm obvioulsy clueless until i read up a bit. i think a good one to lose my em virginity on :-)





i'll power up and describe the results tommorrow.



Logged

Offline v8racefan

  • Trade Count: (+2)
  • ******
  • Forum Posts:
    • Gold Coast Queensland
Re: One for Queenslanders
« Reply #16 on: February 14, 2009, 10:40:17 PM »
wow what a steal, great deal $#$
Logged
Pinballs in my collection Elvira, Stern Grand Prix, Bally Corvette, Creature from the Black Lagoon, Judge Dredd, Black Rose and Data East Guns n Roses.

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
Re: One for Queenslanders
« Reply #17 on: February 15, 2009, 10:06:47 PM »
Fires up but wont start a game??

First things first - make sure you have credits on the credit wheel - yep - seen it before!

Honestly though Stu, that is real clean inside, shes a  beauty!
Logged

stuba

  • Guest
  • Trade Count: (0)
Re: One for Queenslanders
« Reply #18 on: February 18, 2009, 04:34:02 PM »
update. i bit the bullet and powered this thing up today...

there's nothing wrong with it! played about 10 games for a HS of 80K. a few globes to replace and a couple of rubbers but working a treat. the guy told me it wouldn't start games but maybe gav was right and he didn't put credits on it??

one question for the EM guys, the 10's digit on the score reels a little sticky, sometimes only half way down and takes a couple of seconds longer than the others to reset, but does always reset. what should i be looking for to fix?

can't wait to shop this thing out (have got plenty of tips from the jacks open thread thnx) thanks again ford. cheers!



Logged

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
    • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: One for Queenslanders
« Reply #19 on: February 18, 2009, 05:06:35 PM »
Quote from: stuba on February 18, 2009, 04:34:02 PM
update. i bit the bullet and powered this thing up today...

there's nothing wrong with it! played about 10 games for a HS of 80K. a few globes to replace and a couple of rubbers but working a treat. the guy told me it wouldn't start games but maybe gav was right and he didn't put credits on it??

one question for the EM guys, the 10's digit on the score reels a little sticky, sometimes only half way down and takes a couple of seconds longer than the others to reset, but does always reset. what should i be looking for to fix?

can't wait to shop this thing out (have got plenty of tips from the jacks open thread thnx) thanks again ford. cheers!





HA HA..

(Snippet to all the guys that say ems are hard to maintain  ^^^)

Good one Stu !

I think that the score reel plungers are dirty and will need a clean - especially if they have been lubed !

sometimes - You just need to "play it" for a while and it will fix itself (if the problem is not as described above)




Logged
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline ajlaird

  • Trade Count: (0)
  • ******
  • Forum Posts:
    • Greensborough, Melbourne
  • Go Ahead, Make My Day
Re: One for Queenslanders
« Reply #20 on: February 18, 2009, 09:01:32 PM »
Quote from: stuba on February 18, 2009, 04:34:02 PM
update. i bit the bullet and powered this thing up today...

there's nothing wrong with it! played about 10 games for a HS of 80K. a few globes to replace and a couple of rubbers but working a treat. the guy told me it wouldn't start games but maybe gav was right and he didn't put credits on it??

one question for the EM guys, the 10's digit on the score reels a little sticky, sometimes only half way down and takes a couple of seconds longer than the others to reset, but does always reset. what should i be looking for to fix?

can't wait to shop this thing out (have got plenty of tips from the jacks open thread thnx) thanks again ford. cheers!

Unbelievable, that makes it a real good catch!
Logged

stuba

  • Guest
  • Trade Count: (0)
Re: One for Queenslanders
« Reply #21 on: February 21, 2009, 10:36:24 AM »
Quote from: Strangeways on February 18, 2009, 05:06:35 PM

sometimes - You just need to "play it" for a while and it will fix itself (if the problem is not as described above)


you make me laugh. a few more games last night saw the score reel fix itself. they should have patented that concept - the more you play the better they fix themselves. lol
got some cab pics coming for the repaint. starting to think about leaving the mylar on and just fixing the couple of tears.

seeing how these work really completes the picture of the evolution of electronics. amazing to see where we have come from in such a short space of time.

Logged

Offline Extra Ball

  • Read-Only
  • Trade Count: (0)
  • *
  • Forum Posts:
    • Newcastle
Re: One for Queenslanders
« Reply #22 on: February 21, 2009, 10:53:36 AM »
I miss having an EM, and yep all you gotta do to keep them happy is play them.
Logged

Offline jyebow

  • Trade Count: (0)
  • *****
  • Forum Posts:
    • Maitland, NSW
  • GTB Pioneer, Bally Hi-Lo Ace, WMS Space Shuttle,
Re: One for Queenslanders
« Reply #23 on: February 23, 2009, 08:18:31 PM »
Quote from: stuba on February 21, 2009, 10:36:24 AM
Quote from: Strangeways on February 18, 2009, 05:06:35 PM

sometimes - You just need to "play it" for a while and it will fix itself (if the problem is not as described above)


you make me laugh. a few more games last night saw the score reel fix itself. they should have patented that concept - the more you play the better they fix themselves. lol
got some cab pics coming for the repaint. starting to think about leaving the mylar on and just fixing the couple of tears.

seeing how these work really completes the picture of the evolution of electronics. amazing to see where we have come from in such a short space of time.


hey Stu, Just sent the pics. let me know if they're OK.
cheers Steve.
Logged
GTB Pioneer, Bally Hi-Lo Ace, WMS Space Shuttle, Data East Lethal Weapon 3

stuba

  • Guest
  • Trade Count: (0)
Re: One for Queenslanders
« Reply #24 on: February 24, 2009, 09:37:55 AM »
cheers steve
got them and they are good
sent you an email.
thanks
Logged

Offline Creech

  • Forum Founder
  • Trade Count: (0)
  • *****
  • Forum Posts:
    • Adelaide
Re: One for Queenslanders
« Reply #25 on: February 24, 2009, 09:38:45 AM »
Great to see members helping each other out.
Logged
Pages: 1 [2]   Go Up
« previous next »