Author Topic: Gottlieb System 1 Pinball. Hulk.  (Read 356 times)

0 Members and 1 Guest are viewing this topic.

Offline mgjock

  • Trade Count: (0)
  • ***
  • Forum Posts:
Gottlieb System 1 Pinball. Hulk.
« on: February 10, 2012, 09:29:16 PM »
The 3th digit on 1st player score and the 4th digit on 3rd player score do not light up.  Is it a connecotr problem or to do with display unit? Any ideas on how to fix it or what to look for?

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Gottlieb System 1 Pinball. Hulk.
« Reply #1 on: February 11, 2012, 12:18:01 AM »
The 3th digit on 1st player score and the 4th digit on 3rd player score do not light up.  Is it a connecotr problem or to do with display unit? Any ideas on how to fix it or what to look for?

With the game switched off, you can switch the displays around to see if the fault follows the displays. I think it is a display issue, but swapping them will confirm.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline mgjock

  • Trade Count: (0)
  • ***
  • Forum Posts:
Re: Gottlieb System 1 Pinball. Hulk.
« Reply #2 on: February 11, 2012, 01:00:37 AM »
Thanks for the advice. Very helpful. It was a connector issue. As once swapped, they all worked. Swapped them back and now they work. The more I tinker or find faults, the more I realise the connectors seem to cause many erradicate or impromptu faults.

Thanks again

The 3th digit on 1st player score and the 4th digit on 3rd player score do not light up.  Is it a connecotr problem or to do with display unit? Any ideas on how to fix it or what to look for?

With the game switched off, you can switch the displays around to see if the fault follows the displays. I think it is a display issue, but swapping them will confirm.

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Gottlieb System 1 Pinball. Hulk.
« Reply #3 on: February 11, 2012, 09:09:48 AM »
Very important - make sure the earth mods have been done on this game BEFORE it is switched on again. If they haven't, DON'T turn it on as you will posssibly cause massive damage - possibly uneconomical to repair damage .….. a friends Hulk suffered this fate and now it needs too much work to make it worth fixing - stuffed CPU board etc etc..........all for a few wires and solder joins.
Replacement Pinball PCBs that remain faithful to the originals