Author Topic: New member - Beaky  (Read 6233 times)

0 Members and 5 Guests are viewing this topic.

Offline markc

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • melbourne
Re: New member - Beaky
« Reply #30 on: March 16, 2009, 06:25:50 PM »
Looking forward to hearing your impressions when its all set up Beaky!



you played this one before you broke those frogs

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • Melbourne, Vic
Re: New member - Beaky
« Reply #31 on: March 16, 2009, 11:21:21 PM »
Looking forward to hearing your impressions when its all set up Beaky!



you played this one before you broke those frogs
what the? (you played this one before you broke those frogs) ?????????
The SOF is dam Brilliant.
I even had enough patients to wax the playfield before I played it. It looks so shiny.
I will be getting a novus kit (1,2 & 3) for the playfield. fortunately 99% of the bubbles are on the light inserts so they will be easy to get rid of.
The translite has a couple of worn spots, but this has only removed the black behind the blue which means some small areas light up blue
instead of being dark, no great drama there, just a bit of blackout paint will fix that.
it needs some new chrome bolts to go with it's great looking legs.
cabinet has a couple of very small marks.(which are very hard to see.)
overall a 9 out of 10 ^^^ @@*.(it still has the Williams warranty sticker below the coin door on the outside).
It plays as good as the new one i use to play 20 years ago and looks nearly as good.
No broken plastics.
Very clean.
I defiantly got my monies worth with this one.
Thank you Mark and all the guys at childamusments, you are a credit to the pinball industry.
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline ajlaird

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Greensborough, Melbourne
  • Go Ahead, Make My Day
Re: New member - Beaky
« Reply #32 on: March 16, 2009, 11:24:54 PM »
Looking forward to hearing your impressions when its all set up Beaky!



you played this one before you broke those frogs

what the? (you played this one before you broke those frogs) ?????????

Scard Stiff + pinnies4me = broken frogs

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Victoria
Re: New member - Beaky
« Reply #33 on: March 17, 2009, 12:11:42 AM »
Scard Stiff + pinnies4me = broken frogs

I resemble that remark! I think that's "deformation of character"!!! ;)

“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Victoria
Re: New member - Beaky
« Reply #34 on: March 17, 2009, 12:12:49 AM »
what the? (you played this one before you broke those frogs) ?????????

Yeah, sorry buddy!

Glad you like the game - as you can see, I did clean it up after me and Nug raped it!
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • Melbourne, Vic
Re: New member - Beaky
« Reply #35 on: March 17, 2009, 12:37:12 AM »
I just put the first coat of wax on the cabinet.
I'm just about to buff it.
"wax on wax off"
"wax on wax off"
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: New member - Beaky
« Reply #36 on: March 17, 2009, 12:39:03 AM »
I just put the first coat of wax on the cabinet.
I'm just about to buff it.
"wax on wax off"
"wax on wax off"

So we can safely assume you like this pinball ?

 $#$ $#$ $#$
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Marty Machine

  • Guest
  • Trade Count: (0)
Re: New member - Beaky
« Reply #37 on: March 17, 2009, 11:47:31 AM »
All those wearmarks, blemishes and nasties....sounds like a bucket of junk.

I'd be happy to take it from you  !*!

hehehehehe

Offline markc

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • melbourne
Re: New member - Beaky
« Reply #38 on: March 17, 2009, 08:50:07 PM »
All those wearmarks, blemishes and nasties....sounds like a bucket of junk.

I'd be happy to take it from you  !*!

hehehehehe

hahahahah


well done congo man    you wont get it  back from Andrew     its GONEEEEEEEEEEEEEEEE

Marty Machine

  • Guest
  • Trade Count: (0)
Re: New member - Beaky
« Reply #39 on: March 17, 2009, 09:02:05 PM »
10 points for trying hahahahahah....

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • Melbourne, Vic
Re: New member - Beaky
« Reply #40 on: March 18, 2009, 01:23:04 AM »
Wow it's amazing what a coat of wax does to a black blue and silver cabinet.
downloaded a manual for it to day.
trying to find the only electronic fault it has.
the more lights that light up on the play field the dimmer they get.
not the gen illuminination but all the lamps under the inserts.
has anyone had this problem with a system 11b before?
if so let me know so i can save my self some time in fault finding.
it's not overly bad but it is noticeable.
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Marty Machine

  • Guest
  • Trade Count: (0)
Re: New member - Beaky
« Reply #41 on: March 18, 2009, 01:35:13 AM »
Sounds like power-supply regulation problem, could be a bunch of things in the 'chain'...

Could also just be a semi-corroded connector (VERY common) that suffers during higher current demands.
Might be as simple as the main filter cap gettin' old...

I'd suggest measuring the volts on the transformer (that eventually leads to the lamp supply) and make sure the transormer is rated well enough (not lowering in volts) as more lamps come on - design fault?

If volts are stable, then measure at the bridge rectifier, then the filter cap output and eventually into/thru the regulation transistors etc etc......

Somewhere along that line you will see an obvious voltage change as you bring on more lamps.

MM.
« Last Edit: March 18, 2009, 01:37:46 AM by Marty Machine »

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • Melbourne, Vic
Re: New member - Beaky
« Reply #42 on: March 18, 2009, 02:08:08 AM »
thanks.
I've repaired lights and solonoids that stay on or don't work at all but have never come accross anything like this before
all the connections between the tfx to the bridge and to the board look pretty sound (i.e no sign of heat stress due to resistance in a bad or week connection)
Voltage on main filter cap seems to fluctuate quite a bit (16 vdc down to 12 vdc) but the ac input to the bridge only flucuates 2 vac so i think i will start with that cap.
thanks again.
i will keep you posted.
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: New member - Beaky
« Reply #43 on: March 18, 2009, 10:37:51 AM »

Sounds like the GI connector - but you have already checked that.

Possible Dry joints ?

Does this machine have multiple GI relays ? (One for the head, one or the Playfield)
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • Melbourne, Vic
Re: New member - Beaky
« Reply #44 on: March 18, 2009, 01:37:07 PM »
i have another system 11 board here,i will try swapping them over and see if it is on the board or else were.
I should have 18V.dc on the cap but it is dropping down to 12V
« Last Edit: March 19, 2009, 01:09:23 AM by Beaky »
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)