[SOLD] NEW Coindoors (x6)

[Marty Machine]

Hi All,

I have 6 of these brand NEW coindoors to get rid of   $60 posted AUS-wide!
( or take all 6 for $300 posted, saving $60! ).

Local VICs can pickup if you like.

Note:
These accept AUSSIE coins, and have the AUSSIE prices in the cointag inserts.

I have 6 left to clear out, all NEW in original bag, and come with keys attached on the inside too.

There's also a thread somewhere on AP that shows how to move some of the wiring/pins on the connector to fit other pinballs, and/or migrate your existing (smaller?) connector onto this wiring.


Enjoy!
Marty.

[Homepin]

I'll take 2 if they are the standard WMS type ones?

[rads]

I will take the other 4 if they are bally/williams wpc etc

[Marty Machine]

Hi Guys,

Yep, sorry i forgot to mention they are the Bally/Williams replacement doors.

Looks like all 6 are now sold to you 2 guys ;-)

Thanx for that.
Marty.

[Homepin]

PAID

[Marty Machine]

PAID

Thanx mate, all good...  ;-)

[63wizz]

  Missed out.

[andtan]

Bugger

[Strangeways]

Damn.. 

[Pop Bumper Pete]

Ohhh poop
my son could have even picked these up last Monday

[Marty Machine]

Ohhh poop
my son could have even picked these up last Monday

Only if he had a time-machine, i only listed them yesterday (tue) 

[Homepin]

Ohhh poop
my son could have even picked these up last Monday

Only if he had a time-machine, i only listed them yesterday (tue) 

Here you go - problem solved:

[Pop Bumper Pete]

Thanks Doc

[pinsanity]

Great price on these, no wonder they were snapped up.

Not sure if these are the ones with the smaller connector housing on them, but no matter as they are very easy to change the connector on these to fit a standard WPC coin door PCB. Need about $3 worth of parts from rtbb (Molex connector housing and a handful of Trifurcon connector pins) and you are good to go.

From memory when I did it, the existing wiring is even in the correct order so it is just a matter of snipping one wire at a time, attaching a new connector pin and then inserting into the corresponding slot of the Molex connector housing.

15 minutes tops.