The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: FirePower on August 21, 2009, 07:15:33 PM

Title: Williams sys 6 CPU board buttons - where to buy?
Post by: FirePower on August 21, 2009, 07:15:33 PM

Does anybody know where you can buy the diagnostic and command push button switches on Williams sys 6 cpu boards. They are a momentary action with one nc and one no contact.  It's pictured below. I have looked at all the usual places GPE, Futurlec but I can't see them.  I know you don't really need them or I could substitute an equivalent not board mounted but am repairing a board with some corrosion and would like to make it look original.

Thanks for any suggestions.

Title: Re: Williams sys 6 CPU board buttons - where to buy?
Post by: dj10555 on August 21, 2009, 08:16:30 PM

Have you tried Big Daddy?

regards Derek

Title: Re: Williams sys 6 CPU board buttons - where to buy?
Post by: FirePower on August 22, 2009, 11:01:29 AM

Oops sorry, looks like I didn't look hard enough  ^&^

They are available from GPE, part no 39-261-BLK listed under misc components, US$2.75 ea.
Manufactures data sheet is http://www.grayhill.com/web1/images/ProductImages/Push_39_Two_Circuit.pdf

I'm putting together a GPE order to refurbish a few boards so if anyone was after a part or two that didn't justify an order on their own drop me a pm and I'm happy to include your bits.