The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: MiCrO on November 29, 2010, 09:40:23 PM

Title: Indana Jones flipper prob
Post by: MiCrO on November 29, 2010, 09:40:23 PM

Hi Guys
1st problem post, hope someone can help me out?
I have a Indian Jones WB and the left coil keeps getting hot and loosing power.
I have replaced the flipper ass with a new ass and coil and I have also replaced the flipper controller board (new).
Now apart from both new and old coils heating up the f902 fuse blew in the new FCB in about 30sec of playing.
The right flipper is fine.
Any clues would be great!
Ta

Title: Re: Indana Jones flipper prob
Post by: ddstoys on November 29, 2010, 10:42:35 PM

Sound like an issue with the end of stroke switch that would be the first thing to check

Title: Re: Indana Jones flipper prob
Post by: Strangeways on November 29, 2010, 10:52:28 PM

Quote from: ddstoys on November 29, 2010, 10:42:35 PM

Sound like an issue with the end of stroke switch that would be the first thing to check

+1

Check the EOS - A warm flipper coil losing power is usually the EOS not being gapped correctly.