Author Topic: Wpc-s Power driver pcb cooking  (Read 1267 times)

0 Members and 6 Guests are viewing this topic.

Offline johnwartjr

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Columbus, Indiana USA
  • It's ALIVEEEEEE!
    • My Home Gameroom . com
Re: Wpc-s Power driver pcb cooking
« on: February 22, 2012, 02:52:04 PM »
That's a WPC voltage plug, like in Doctor Who. ToM is WPC-S, the larger 12-pin connector.

If you remove the voltage plug, and put the tab to remove it pointing down, pin #1 is the upper left corner

For 240 volt operation, you need 3 jumpers

Pin 1 to pin 11
Pin 3 to pin 9
Pin 7 to pin 10

Properly repaired, as Beaky stated, the GI in your TOM should be good for YEARS of trouble-free use, especially in the home. There's something else wrong, and it's going to smoke a replacement board. Get another tech.