I have a whole row of switches not working on Zac DR... its switches 32 through to 39... all switches are connected via a thin black wire ( common ground i suspect). According to schematics this wire should go to the CPU at CN10 pin 5... i have nothing at pin5... mine goes to CN11 pin 5.
Can someone with a working DR check the location of this black wire? Is it CN10 or 11??

( BTW - row still doesnt work if i move the wire to CN10)

Cheers guys..

there is a black wire at CN11 pin 5
there is no wire at CN10 pin 5