Another job I did was to clean and polish the legs, as they were just a bit rusty!!

Some Ranex and steel wool made short work of this, just dipping the steel wool into some Ranex and a bit of scrubbing took the rust off nicely! The insides at the bottom where the levellers screw in, I let these soak for a while the I attacked them with steel wool, and a small wire wheel in my drill for the more stubborn bits, the came up pretty good! After this a polish with some Autosol and they looked pretty sweet!

New leg levellers will go on when they go back on the game, the old ones were launched into the nearest bin.