This is where a Pascal board manual or making contact with Pascal himself might help if you are not quite sure which coil and what you should be checking. I am guessing that the manual would list which coils are numbered what with his board to pinpoint the culprit.
Other option is to check all the coils under the playfield - give a little tug on all the wires and make sure none are loose. If they are all good, check any diodes and make sure none have come loose as well as the winding itself. Also check that the plungers on all of the coils move in and out of the coils freely.
+ 1 to contacting Pascal - great guy, he will certainly respond (always has to me) Email is -
pascalpi1@aol.com The manual only covers coils 1-5 as they are the same for all games (outhole, knocker, 10 pt, 100 pt, 1,000pt). For the next three coils (6,7,8), they are specific depending on which game, but the manual does not unfortunately give a list of the game specific coils driven. Starting point would be an email to Pascal - ask him if he can tell you which coil is being driven on your game by driver 6. Likely easy from there.
