Checked the switches on the right sling shot. Found they do not work in test mode. Changed diode and rewired bare jumper cables. Still not working in test mode. Belled out switches they seem fine. Were to next. Im not sure.
This is also the same for the 3rd middle target.
There is a brown/white cable going to both of these switches.
Not sure if this has something to do with it.
Also traced the blown globes on the back glass that are not working. Found they go to the aux lamp driver board. Followed them through to the chips all light circuits four of them go to each leg number 6 of each chip. The resistors are ok. On the jacks there labeled 1,2,3,4, cloud. On test mode i get just 1v at socket with globe removed any idea.
