Look nice, though must admit for Tron I am tempted by these transparent ones that require back lighting, ordered some for BSD already...

http://www.pinballcenter.eu/catalog/tron-legacy-instruction-card-transparent-p-2986.html?language=english

Just a heads up that these "kits" are not plug and play. I have illuminated 4 of my pins so far with these and have had no troubles with shorting out on BW metal aprons.

There are no installation instructions included with these and you will need to buy some trifurcon connector pins and a molex connector housing.

http://www.rtbb.com.au/catalog/product_info.php?products_id=1407&osCsid=ac97012eec15e6970b06bd1266430e33
http://www.rtbb.com.au/catalog/advanced_search_result.php?keywords=molex&osCsid=ac97012eec15e6970b06bd1266430e33&x=0&y=0

You will also need to locate a 12v source on your machine (usually found inside the cabinet next to the coin door but there is an alternative 12v source in the backbox as well on Bally Williams machines.)

If you need some advice on where to connect to I can do a write up of the process.