Author Topic: Bally Fathom Restoration - Number Two  (Read 10867 times)

0 Members and 4 Guests are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Bally Fathom Restoration - Number Two
« on: March 15, 2013, 11:45:18 AM »

I've prepped the lower cabinet and finished the base coat. This is the exact finish of the original. Don't know why Bally went down the path of almost a flat finish, but this is the factory finish for this game ;





Did a little bit more than just the areas seen at the playfield level.








Cabinet is put aside for a couple of days to fully cure.


Headbox


Masked and ready for the BLUE stencil





Even coverage -  Not too heavy..





Some minimal paint lift which will be addressed later





Here we go with the lime / green stencil in place. This is a very intricate stencil to match with the blue. It takes a while to register and align with the blue, and you really don't know how close you are until you remove it after painting.





Even coat of lime / green





With the lime stencil removed





Close up - What a fantastic job Gavin did with these stencils  *%*





Headbox completed !




 <.>
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia