The new CPR playfield is 500% better that the old one. Apart from the dimples being slightly out (I did check before drilling), for some reason two ball wire lane guide holes were completely missing and in the next picture, you can see the lower right side wood rail (held with three screws), the pre-drilled holes are also different to the original. The main issue I have is that the last screw hole (far right) is way off (it’s too high, should be on the black line). If I use that pre-drilled hole, the screw would most likely push through the wood rail. I will drill a new hole through the playfield, when I get up the courage.
