I still can't check any voltages as the fuse in my multi meter is blown and no places locally have the one I need, not sure when that happened but waiting on some of those fuses and a pinball pack of fuses to come care of Homepin
I did disconnect the below ribbon and checked all the plugs and chips by pushing them all into place and powered the machine up and noticed that none of the 3 cpu leds light up at all - so appears power supply is a issue to the cpu
I also attached a photo of what appears a hacked power cable and a screen shot of the power board - the hack plug connects to CN5
Black wire does marry up with ground
Red wire marry's up with +5V
I have ordered a replacement lead from pinballlife to correct this as this current plug is a tad loose
