ok I installed all the following parts 

TR5 - Transistor 2N6057
C2 - Capacitor 100uf25v
C3 - Capacitor 47uf63v
C7 - Capacitor 330uf25v

with the +- in the correct direction and unfortunately no change in voltages, with the dmd not plugged in still only getting 4.83v and with the dmd plugged in 0.05v at the 5v test point and on the power supply to the dmd as well.

I also tested the white resistor and still get the same results as listed before

no plugs to the dmd - white resistor
lhs = 4.83v  ,  rhs = 5.05v

with just the dmd lead in - white resistor
lhs = 0.39v  ,  rhs = 0.55v

with just the dmd board lead in - white resistor
lhs = 0.06v  ,  rhs = 0.19v

with both dmd & dmd board leads in - white resistor
lhs = 0.06v  ,  rhs = 0.18v


Beaky or anyone else have any clues, please