all I need is confirmation off someone with a operational Baywatch of what plugs are right and not right as if I put this updated power lead the power will be opposite to what is currently wired in.
Power Supply Board
CN1
1-purple
2-orange
3-orange
4-
5-
6-
7-
8-
9-
10-grey / green
11-grey
12-grey/white
CN2
1-
2-
3-black
4-
5-
6-black
CN3
1-
2-
3-
4-red
5-red
6-red/white
7-
8-
9-
10-
CN4
1-black
2-black
3-black
4-black
5-blue
6-blue
7-blue
8-blue
9-black
10-black
11-black
12-black
CN5
1-black x 2
2-
3-
4-
5-
6-red x 2
7-
8-
these wires are in correct as schematic says 5+ is at 1,3,4,5 and ground at 6,7,8 - THIS IS WHERE I REALLY NEED CONFIRMATION OF THE DMD CONTROLLER BOARD AND DMD DISPLAY
CN6
1-
2-
3-black
4-black
5-black
6-
7-grey
8-grey
9-grey
10-grey
11-
12-
13-grey/red
14-black/grey
15-
CN7
1-brown/red
2-
3-red
4-
5-
CN8
1-brown
2-yellow
3-green x 2
4-purple
5-
6-white/brown
7-white/yellow
8-white/green
9-white/purple
CN9
1-yellow
2-yellow
3-white/yellow
4-white/yellow
DMD Display Board
J1
1-red (goes to CN5)
2-
3-black (goes to CN5)
4-
5-
DMD Display
J7
1-blue
2-black
3-black/red
4-red
this actually has a junction plug and noticed a wire switches from one plug to the other
blue - turns into purple (goes to BR3)
black - black/red (goes to BR3)
black/red - black (goes to CN5)
red - red (goes to CN5)
should the black join the black
should the black/red join the black/red
also can the one or both of these boards work with the 5+ and ground wired in opposite, but figuring if someone can confirm what these is wired at (ensure yours is working) then I can swap around before I connect up the dmd fix cable as don't want to bugger something up.
If someone can help then I can list the info and can only aid others.
