Author Topic: Funhouse Right Flipper Blowing Fuses  (Read 538 times)

0 Members and 3 Guests are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Funhouse Right Flipper Blowing Fuses
« on: August 21, 2013, 08:40:36 PM »
Had same problem on t2 and was poor eos spacing

+1

Could be a coil diode as well. Measure the resistance of both coils. If the fuse blows straight away, is will be a diode or a short in the winding. If it blows the fuse after a few games, you should smell the coil - or at least check if the coil is hot (careful with this). If it is hot, then it will be EOS spacing, or a wire has fallen off the EOS.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia