Author Topic: My Black Hole Project  (Read 4593 times)

0 Members and 2 Guests are viewing this topic.

Offline goodolddays

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Riverstone NSW
Re: My Black Hole Project
« Reply #15 on: September 26, 2013, 05:20:05 PM »
I've been concentrating on the rusty area on the underside of the top playfield . Fortunately the lower playfield underside is fine .

First thing I pulled out was the 'hole' target bank which was in a bad way rust wise, including most of the target springs have rusted away . Will have to try and find some suitable replacements . I was tempted to add a new set of 'Black' 'Hole' targets to my parts list but have decided to jsut refurbish what I have , to try and keep costs down a bit.
I've repainted the white on the 'hole' targets with my $2 shop acrylic and covered them with sticky tape .

Have also replaced a number of lamp sockets that were beyond salvation due to rust , using some old ones I had in my spares .
Had to re purpose them to suit where required.
I need more room ! and more $$$