Author Topic: Bally Fathom Restoration - Number Two  (Read 10829 times)

0 Members and 3 Guests are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Bally Fathom Restoration - Number Two
« Reply #45 on: December 13, 2013, 10:14:05 AM »
Finally at the "end of the road" with this restoration. The lamp shrouds from Jady have been installed and work great  @@*

The spinner decal was the last piece of the puzzle and also a new playfield glass was installed. The original backglass had to left "as is" as someone had used gaffer tape to hold down the flaking lower section. I had some minor issues with drop target alignment, so I had to drill new holes and re-adjust their position. But all good now.

Here's some final shots before it was loaded into it's owners' Van










Here's the NEW Shrouds which work perfectly.








Final pictures of completed restoration ;














(Door Sticker needs to be installed !)











A BIG "Thank You" to Gavin for these stencils. They were a bit of a battle due to their complexity. Also a BIG "Thank You" to Greg from RTBB who supplied most of the parts on this restoration.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia